Contec OC5B Oxygen Concentrator

INTRODUCTION

OC5B oxygen concentrator consisted of air compressor, adsorption tower of molecular sieve, oxygen sensor and quadric meter uses the molecular sieve as the absorbent, adopts pressure swing absorbers (PSA) to directly concentrate the medical oxgen with high concentration form the air. And it is a small and portable oxygen concentrator.

The machine takes the advantage of small in volume, light in weight,convenient in moving (as it has turning truckle), stable in performance, high in sagety, easy in operating,low in noise, safe in working,which complies with requirements of medical device.

The machine can provide Oxygen, Spo and pulse rate to hypoxic patients communities, medical institutions (exclude ICU) and family.

FEATURES

• With turning truckle, easy to move
• Built-in filter to sieve the impurity
• Oxygen concentration status indicator
• Function of accumulating time
• Function of timing shutdown
• Alarm for power failure
• Alarm for high/low pressure protection
• Alarm for low flowrate
• Measure SpO2 and pulse rate
• With working indicator

 PHYSICAL CHARACTERISTIC

Dimension: 508mm(L)*260mm(W)*530mm(H)

weigh:21kg

Environment

•  Temperature:10'c-40'c
• Relative humidity<80%
• Atmospheric pressure : 860hpa-1060hpa 

PERFORMANCE

• Maximum recommended flowrate: 5L/min
• Oxygen output concentration Levels: (reach the stated oxygen concentration level after turning on the machine for thirty minutes):it's 93%+3 when the flowrate is 0.5-5L/min
• Flowrate range:0.5-5L/min
• Change in maximum recommended flow when back pressure of 7kpa is applied<0.5L/min
• Outlet pressure :20kpa-50kpa
• Average power Consumption :400VA
• Electrical Requirements: Ac220v+10% 50Hz+1Hz
• Pressure Relief Mechanism Operational at :250kpa+50kpa
• Sound Level:<55db(A)
• Spo2 Measurement
• Range:35%-100%
• Resolution:1%
• Accuracy: when SpO2 is 75%-100%,the error is +2%:no definition when SpO2 is less than 70%

PULSE RATE MEASUREMENT

• Range :25pm -250bpm
• Resolution:250bpm
• Accuracy:1%+1pm

SAFETY CATEGORIES

•  Anti-electroshock type:class II equipment
• The degree of protection against electroshock: Type BF applied part
• The degree of protection against ingress of water:Ip21